Constant voltage

60W 24V 2.5A Waterproof Strip Power Supply

APMS-60-24
60W 24 2.5A outdoor LED Driver
waterproof led power supplies
waterproof power supply for led strips
Product description: APMS-60-24, LED Driver, IP67 waterproof fully sealed with potting, used for outdoor led lighting, floodlights, LED wall washer lights, spotlights, led projector lights.
INQUIRY

Product Features:

1. 176-305VAC wide input voltage range

2. Constant Voltage Drive Mode

3. Built in active PF function, PF>0,95

4. High working efficiency up to 90%

5. THD<15%, Flicker-Free Design

6.IP67 waterproof level with fine aluminum housing, suitable for outdoor applications

7. Class 2 Power unit

8. 4KV + 6KV Surge protection, more safety

9. 5 years warranty

Input Parameters:

Items	Specs	Unit	Conditions
Rated Output voltage	24	VDC
Rated Output Current	2.5	A
Rated Output Power	60	W
Tcase	90	℃	Ta:60℃, 230VAC, full load
Efficiency	≥87.5 (Typical 88)	%	240VAC input, Rated Load
Line Regulation	±0.5%
Load Regulation	±1.5%
Voltage tolerance	±3%
Ripple & Noise (max)	≤2.4	Vp-p	Measured at 20MHZ of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor
Rise time	≤60	mS	25℃ , full load
Power On Delay time	≤2	S	200-240VAC, full load
Switch off Hold Up time	/	ms	Rated input voltage, rated load

Input Parameters:

Protection:

Current Limiting

110%-160%

Hi-CCUP Mode, Auto-recovery

after fault condition is removed

Short circuit

Yes

Hi-CCUP Mode, Auto-recovery

after fault condition is removed

Input Undervoltage protection

>80

Temperature Condition:

Operating Temperature range	-40 to +80（Typical25）	℃	Refer to Derating Curve
Storage Temperature range	-45 to +80（Typical25	℃
Humidity	10～95	%	NON-Condensing
Altitude	0～5000	M	Altitude Over 2000 meters, 1.5% derating for every 100 meters increase
Waterproof Level	IP67
Cooling method	Air convection
Temperature Coefficient	0.03%/℃ (0-60℃ )
Vibration	10-500Hz, 5G 12min./1cycle, period for 72 min, each along X.Y. Z axes

Safety Standards and EMC

Safety standard	UL8750, IEC/EN61347-1,EN61347-2-13,EN62368, GB19510.1,GB19510.14, IP67 Approved
Withstand voltage	I/P-O/P	3000Vac 10mA (Max)
	I/P-FG	1500Vac 10mA (Max)
	O/P-FG	500Vac 10mA (Max)
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
Leakage Current	＜0.75mA	240Vac/60Hz

Conducted

EN55015(CISPR15), GB17743

Radiated

EN55015(CISPR15), GB17743

Harmonic Current

EN61000-3-2 , Class C @load≥50%

ESD	EN61000-4-2, 8KV air ; Level 2, 4KV contact
Radiated	EN61000-4-3
EFT/Burst	EN61000-4-4
Surge	EN61000-4-5，4KV/Line-Line 6KV/Line-Earth
Conducted	EN61000-4-6
EN61547, Electromagnetic Immunity Requirements applies to lighting Equipment

MTBF

200Khours, MIL-HDBK-217F (25℃)

Dimension

115(L)*64 (W)*37(H)

Packing

0.41Kg;24pcs/ 10.5Kg/0.026CBM

Other Output Options Available: